Do-it-yourself wooden garden storage boxes are a simple means of storing seasonal and temporary items. Wooden storage boxes can be utilized in the garage, on the patio or in a storage shed to hide seasonal equipment, like patio sets, pool equipment, bikes and machinery. While you can easily invest in a storage box at a hardware store, building a wooden one at home is actually a cheaper alternative as well as the box can be personalised and custom-built to fit into any space.
Appraise the space where Reviewed By Godwins Removals – Outdoor Storage Box will likely be placed, and write down the figures for the height, width and depth you require the box to become. Draw the pieces necessary for the four sides of the box on the plywood sheets, utilizing a pencil. You will want two side pieces measuring height by depth, as well as the front and back pieces should measure height by width. Cut out the four pieces using the saw. Utilize the sandpaper to create the edges and surfaces smooth and splinter-free.
Arrange one of many side pieces so it is perpendicular to the front piece. Both pieces needs to be on end, as well as the end in the side piece should be covered by the outer lining side from the front piece. In other words, along side it pieces is going to be attached inside the front and rear piece ends.
Attach the two pieces utilizing the drill and at least four screws from the front piece. Attach the next side piece in the same manner towards the opposite end from the front piece. Make sure the second side piece’s end is inside the front piece. Last, attach the rear piece with the drill and screws, so both ends of the side pieces are protected by this last piece. You need to now have a rectangular wooden frame.
Look at the rectangular frame’s perimeter. This can provide the measurements for your bottom and lid pieces. Write the measurements down. Transfer the measurements to the plywood, employing a pencil. Be certain they’re square, then cut them out with the saw and sandpaper both pieces.
Attach the base piece by lining it up towards the wooden frame. Put the level on the box to be sure the piece is level as well as. Attach it with screws placed every 6 inches, drilling the screws through the bottom piece and into comfou four sides. When done, change it over, so you have an open box without having a lid.
Attach two hinges for the lid piece, screwing these to the underside of one of many long sides. Flip the wooden garden storage box on its side to install the lid properly. Line the lid approximately the package in order that the hinges are within the box and attach the hinges using screws as well as the screwdriver. Flip the wooden storage box right side up and close the lid.